To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
ActionTrac motorized running boards automatically deploy a second step as your vehicle's doors open and retract when the doors close. Integrated LEDs and obstruction-sensing smart system enhances safety. Easy installation with custom fit kit.
Features:
Specs:
California residents: click here
Average Customer Rating: 4.4 out of 5 stars (69 Customer Reviews)
ActionTrac motorized running boards automatically deploy a second step as your vehicle's doors open and retract when the doors close. Integrated LEDs and obstruction-sensing smart system enhances safety. Easy installation with custom fit kit.They are working as advertised, which is good for an old man. Service after the sale was great.
I am very happy with the steps with one exception I'll mention later. The Aries fore and aft action was perfect for our 2020 Ram 3500 chassis cab. The steps look great and were easy to install with running wires and locating the processor taking the most time. My only complaint regards the led step lights. Both began flickering then failed completely, the driver side after about six months and the passenger side in the last several weeks.
These running boards are the best, they make getting into my truck a breeze for me and my wife.
So far the steps are mechanically installed. Found some manufacturing problems with the truck assembly. The only problem with the Action product so far, is the connection of the 3 wires for the disable switch. The black wire terminal is too small to mate to the switch. I have not powered the system yet, maybe tomorrow. Any more problems I'll send a message.
Thanks
Another excellent product offered by e trailer. Would definitely recommend.
I liked the idea of a two step running board. My wife has had operations
on her knees and was difficult for her to get into her jeep with the
standard side steps. I started looking for powered steps and these
sounded like just the ticket. There was some fabrication involved,
because I installed them on a 2000 TJ Wrangler, but nothing too crazy. I
used some 3/16" flat bar and sandwiched it between the body mounts. In
retrospect, I should have used C channel for the longer front mount,
because I had to weld gussets on it. Welded a piece of angle to the
flat bar for the supplied mounts. If you don't have a welder, it could
all be bolted in with the C channel.
I also didn't care for the supplied magnets and switches held on with
tape to operate the steps. We hit up the u-pull-it wrecking yard and got
the same style switch that operates the dome lights and I installed them
above the original switches.
I put the door delete bypass in the housing for the front speakers on
the dash.
They have been installed for about two months now and we've had no
problems with the operation. Lots of likes from our friends who see them
in operation.
4.5* actually. Overall, I really like these. They are a good price and they look nice. Some of the brackets had to be bent a little bit to get them to line up correctly, but it wasn't bad. I've actually purchased these twice! I sold the first vehicle, but immediately bought these for the better optioned vehicle I traded up for. NOTE - DO NOT buy the door delete kit that can be added to this. It's a waste of money that overrides the basic automatic functionality on a daily basis. The basic kit includes an on/off switch already.
Very good steps, but the light "flickers" on/off on 1 side and stays on all the time on the opposite side! Doesn't really matter because they aren't bright enough to help in the dark!
Steve with TekRV, a mobile RV mechanic, out of Galveston did the installation. Everything went according to the instructions. Looks and works great. Co-pilot is happy, I am estatic.
Several concerns with this step. First is the design: The concept of two steps is so you can use two steps. However, the position that these rails attach to the truck makes them near level to the truck floor board which makes this step near useless. The second (lower) step is undependable when deploying and the angle at which it deploys means you have to step past the first to get in or out of the truck. So weird. This creates an awkward angle when getting in and out of the truck. When installing you must ensure the magnets are lined up perfectly. Even the slightest misalignment causes the lower rail to malfunction. The advertisement says these are maintenance free. This is not sure, you must routinely use a graphite lubricant on them. One step literally fell apart and they had to send another. We soent hours on the phone with their support team trying to diagnose why the seconds deployed erratically. The LED lights were a huge problem and turned on and off at intermittent times, even when parked. Very distracting for the neighbors. The third set of lights finally seem to be functioning correctly. When all said and done, after all the issues, they seem to be working fine, but again, the angle on which they deploy are not functional. If I had it all to do over, I’d never buy a deployable running board. They’re just a electric maintenance mess.
best looking running board! the ability to step on it to access roof rack is amazing and there is only one other competitor that does that. THIS IS NOT A ROCK SLIDE! But as a certified mall crawler this is great for the ladies and kids jumping in
Seems like an excellent product. Etrailer makes things so easy, great software, terrific customer service and reliable shipping.
The running boards have worked perfectly. the closed height is unobstructive for normal 4x4 use and the down position makes entry and exit easy even for persons with dexterity problems.
the light package is adequate for front and rear doors.
Installation went well, leave all bolts loose until mounted then tighten seems to make it easy.
I would highly recommend.
Great product. Good fit, runs well with the body lines. Very clean install.
I order these for my 2022 Chevy 2500 they had them is stock and came fast. Very good fit bolted right on. It took me about 3 hours in my driveway to install them. They are about 12” off the ground when deployed. I like the 2 steps design very helpful. They look very nice and are built strong.
Fantastic product
Got running boards on and went very easy and I’m 71 years old
Going to tackle the wiring harness this morning
The running boards arrived sooner than expected and customer service is great. The website could be better to see and understand what exactly you’re buying. Haven’t been able to install them yet, had to order extra parts. Downgrade one notch due to website.
I have to say I was a little bummed when UPS showed up with my running boards and the box was destroyed so I refused delivery called etrailer up they said no problem and my new ones were here in 4 days, on a Holiday weekend mind you, customer service is second to none I highly recommend purchasing from etrailer
I really like them, the snow and ice sometimes stops them that's understandable and the lights don't always work I haven't looked at them yet but yes we love them thank you
Running Boards are exactly as advertised. Simple to install as long as you follow the instructions.
I finally got them installed and they are wonderful. My wife has arthritic knees and it was very difficult for her to get in the Jeep. With these Motorized Running Boards she can now get in effortlessly.
Perfect fit and super easy to install.
Look good, functions well but an extremely difficult install.
Do you have a question about this Nerf Bars - Running Board?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
11/23/2021
Please check to see that the LED connector is plugged in and secure. Inspect the LED and wiring harness for damage. To test LED functionality, apply 12 volts directly to the LED. If the LED will not turn on when directly connected, it will need to be replaced. The manufacturer handles warranties directly, so I will email you their contact information.